SAE Industrial Felt - Firm density F50 for Washers, Wicks, Polishing Blocks & More. Custom stripping, die cuts, converting available

F-50 Industrial Felt

Product Type: Full Roll

Full Roll Cut Yardage

Thickness: 3/64"

3/64" 1/16" 3/32"

Backing: Plain

Plain With Adhesive

Description

SAE F-50 has the same specs as F-1 but denotes a thickness of 3/32” or less. Due to its high resilience, F-50 is recommended for uses where surface integrity is needed. It is also great for low viscosity oil absorption and retention. On a firmness scale of 1 to 10, the F-50 rates a 9.

Min. Wool Content of 95%
Roll width of 60”
Tensile strength 500 psi

Roll lengths range from approx. 40 to 50 yards depending on material thickness.

Cut yardage refer to material cut from a master roll in yard increments. Minimum order quantities apply to cut yardage.

Can’t find what you’re looking for? Contact Us for custom solutions.

Color Disclaimer

Color and blemish variation will occur. We cannot guarantee consistency between lot to lot.

Color variation: Sheep hair occurs in a spectrum of beige and gray tones, making consistent coloration between rolls difficult to achieve without the use of dyes.

Blemishes: Industrial felt is manufactured using wool from sheep. The fibers undergo washing and, in certain cases, carbonization. Wool that has been carbonized yields a cleaner, more uniform blend, while uncarbonized fibers may retain trace amounts of burrs, seeds, or other inclusions inherent to raw fleece.

NOTE: Colors which appear online or in print may differ slightly from actual felt. If color accuracy is critical to your application, please request a physical sample before ordering.

Application

Common industrial uses include washers, bushings, wicks, door bumpers, polishing blocks, spacers and parts where abrasion resistance is needed.

Technical Datasheets

Download the full Technical Datasheet.
PDF

Digital Swatch Card

Download full Digital Swatch Card
PDF

Quantity: